Equipment Specifications for a Case 6030

   
Equipment Specifications Library Documents Financing Internet Resources
 
Picture 1 Picture 2 Picture 3

Equipment Specifications Library

Manufacturer: Case
Model: 6030
Rig Size: 20,001 - 30,000 lbs pullback
 
  US/Imperial Metric
Displacement: 359 cubic inch 5.9 L
Entry Angle: 15°-25°
Fuel Tank Capacity: 55 gal 208 L
Ground Drive Speed: 1.4 mph 2.2 km/hr
Height: 82" 2.1 m
Hydraulic Tank Capacity: 30 gal 113 L
Joint Diameter: 2.625" 66.5 mm
Length: 238" 6.0 m
Length: 10' 3.0 m
Make and Model: Case 6T-590
Manufacturer’s Gross HP Rating: 124 hp 92.5 kW
Max Flow: 30 gpm 113 Lpm
Max Pressure: 1000 psi 6894 kPa
Max Spindle Speed: 290 rpm 290 rpm
Max Spindle Torque: 4,000 ft/lbs 5420 Nm
Pipe Diameter: 2.375" 60.5 mm
Pullback: 30,000 lbs 13 560 kg
Rated Engine RPM: 2200 rpm 2200 rpm
Rod Carrying Capacity: 500'
Thrust: 30,000 lbs 13 560 kg
Torque: 4,000 ft/lbs 5420 Nm
Weight: 13,685 lbs 6206 kg
Weight: 75 lbs 34 kg
Width: 74" 1.9 m
 
 
Equipment Library
 


This information is provided for informational purposes only. HDD Broker, Inc. cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

The use of trademarked names herein does not suggest sponsorship or association of HDD Broker with the trademark owner's product or service.
Change website to: United States, Australia, Canada, New Zealand, 中国, русский, Português, Español, Deutsch, Polskim, Français, हिंदी, العربية