Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D20x22 Series II
  • Rig Size:
    10,001 - 20,000 lbs pullback

View Manufacturers View Models

Specs

Displacement 230 cu.in 3.8 L
Emissions Compliance Tier 3 Stage III A
Engine Cooling System 16 qt 15.1 L
Entry Angle 18 - 20°
Fuel Tank Capacity 25 gal 94.6 L
Fuel Type Diesel
Ground Drive Speed 2.5 mph 4 km
Height 76" 193 cm
Hydraulic Tank Capacity 23 gal 87.1 L
Length 10 ft 3 m
Length 200.4" 509 cm
Make and Model Kubota V3800 Turbo
Manufacturer's Gross HP Rating 83 hp 61.9 kW
Max Carriage Speed 135 fpm 41.2 m/min
Max Flow 25 gpm 94.6 L
Max Pressure 1000 psi 69 bar
Max Spindle Speed 208 rpm
Max Spindle Torque 2200 ft-lb 2982.8 Nm
Min Bend Radius 101 ft 31 m
Min Bore Diameter 3.5" 8.9 cm
Number of Cylinders 4
Pipe Diameter 2.06 in 5.2 cm
Pullback 20000 lb 9071.9 kg
Rated Engine RPM 2200 rpm 2200 rpm
Rod Carrying Capacity 350 ft 107 m
Rod Loader Yes - standard
Thrust 20000 lb 9071.9 kg
Type Firestick I
Weight 59 lb (27 kg)
Weight 11700 lbs 5307 kg
Width 50" 127 cm

Additional Info

DIMENSIONS AND WEIGHTS
Length (Minimum Transport): 200.4" (509 cm)
Width (Minimum Transport): 50" (127 cm)
Height (Minimum Transport): 76" (193 cm)
Weight: 11700 lbs (5307 kg)

ENGINE
Make and Model: Kubota Turbo 3800
Fuel Type: Diesel
Maximum Engine RPM: 2400 rpm
Idle Speed: 2400 rpm
Rated RPM: 2200 rpm
Gross Horsepower: 83 hp (61.9 kw)
Net Horsepower: 78 hp (58.2 kw)
Torque (Maximum): 240 ft-lb (325.4 Nm)
Displacement: 230 cu-in (3.8 L)
Number of Cylinders: 4
Cooling Method: Antifreeze
Aspiration: Turbo
Max Fuel Consumption: 4.2 gph (15.9 Iph)
Air Cleaner: Donaldson
EPA Certification Family: Tier 3 (Stage IIIA)
Maximum Operating Angle (Fore/Aft)*: 20 degrees
Maximum Operating Angle (Left/Right)*: 20 degrees

OPERATIONAL
Thrust: 20000 lbs (9071.9 kg)
Pullback: 20000 lbs (9071.9 kg)
Maximum Carriage Speed at Maximum Engine RPM: 135ft/min (41.2 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 2200 ft-lb (2982.8 Nm)
Maximum Spindle Torque (High at Maximum Engine RPM): 1430 ft-lb (1938.8 Nm)
Maximum Spindle Speed at Max Engine RPM: 208 rpm
Minimum Bore Diameter: 3.5" (8.9 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 2.5 mph (4 km/h)
Automated Rod Loader: Standard
Noise Level at Operator's Ear: 90 dB(a)
Drill Rack Angle: 18 deg

ELECTRICAL SYSTEM
Voltage: 12
Battery CCA Rating: 950
Alternator Current Rating: 90
Battery Group Class: 31

FLUID CAPACITIES
Fuel Tank: 25 gal (94.6 L)
Engine Crankcase with Filter: 9 qt (8.5 L)
Hydraulic Tank: 23 gal (87.1 L)
Engine Cooling System: 16 qt (15.1 L)
Antifreeze Tank Capacity: 2.5 gal (9.5 L)

HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 24 gpm
Auxiliary Pump Relief Pressure: 3300 psi (227.5 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 33 gpm (124.9 L/min)
Thrust/Pullback Pump Relief Pressure: 3335 psi (229.9 bar)
Rotation Pump Flow at Maximum Engine RPM: 33 gpm (124.9 L/min)
Rotation Pump Relief Pressure: 3335 psi (229.9 bar)

DRILLING FLUID SYSTEM
Maximum Flow: 25 gpm (94.6 L/min)
Maximum Pressure: 1000 psi (69 bar)
Brand: FMC

FEATURES
Breakout System: Hydraulic vise
Stakedown System: Standard
Strike Alert: Standard
Remote Lockout: Standard
Operator Presence: Standard

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x