Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    JT2020 Mach 1
  • Rig Size:
    10,001 - 20,000 lbs pullback

View Manufacturers View Models

Specs

Displacement 199 cubic inches
Engine Engine: Cummins B3.3
Entry Angle 10 - 14 degrees
Fuel Tank Capacity 30 GAL 113.562 40 liters
Fuel Type Diesel
Ground Drive Speed FORWARD: 3.0 MPH
Height 78 in 1.9812 meters
Hydraulic Tank Capacity 17 GAL 64.3520003 liters
Joint Diameter 2.63 IN 6.6802 centimeters
Length 120 IN 304.8 centimeters
Length 203 in 5.1562 meters
Make and Model Cummins B3.3
Manufacturer's Gross HP Rating 83 HP
Max Flow 30 GPM
Max Pressure 1500 PSI 103 bar
Max Spindle Speed 150 RPM
Max Spindle Torque 2200 FT-LB
Min Bend Radius 130 FT
Min Bore Diameter 4 IN 10.16 centimeters
Number of Cylinders 4
Pipe Diameter 2.06 IN 5.2324 centimeters
Pullback 20,000 lb 90 kN
Pump Output Maximum flow rate 30 gpm
Rated Engine RPM 2400 RPM
Rod Carrying Capacity 400'
Thrust 17,000 lb 75.6kN
Torque 2200 ft/lb, 150 rpm spindle speed 2983 Nm, 150 rpm spindle speed
Type POWER PIPE
Weight 10,800 lb 4 898.7976 kilograms
Weight LINED: 67 LB 30.39068879 kg
Width 50.5 in 1.2827 meters

Additional Info

DIMENSION
OVERALL LENGTH: 203 IN
OVERALL WIDTH: 51.5 IN
OVERALL HEIGHT: 78 IN
RACK CAPACITY 400'
DRILLING UNIT OPERATING MASS: 10,800 LB
ENTRY ANGLE: 10 - 14 degrees
ANGLE OF APPROACH: 18 degrees
ANGLE OF DEPARTURE: 18 degrees

POWER PIPE
LENGTH, NOMINAL: 120 IN
DIAMETER: 2.06 IN
DIAMETER, TOOL JOINT END: 2.63 IN
BEND RADIUS, MINIMUM: 130 FT
WEIGHT (LINED: 67 LB

OPERATION
SPINDLE SPEED, MAXIMUM: 150 RPM
SPINDLE TORQUE, MAXIMUM: 2200 FT-LB
CARRIAGE THRUST TRAVEL SPEED: 140 FPM
CARRIAGE PULLBACK TRAVEL SPEED: 140 FPM
THRUST FORCE: 17,000 LB
PULLBACK FORCE: 20,000 LB
BORE DIAMETER: 4 IN
BACKREAM DIAMETER (SOIL DEPENDENT): variable
GROUND TRAVEL SPEED, MAXIMUM*
FORWARD: 3.0 MPH
REVERSE: 3.0 MPH

POWER
ENGINE: Cummins B3.3
FUEL: Diesel
COOLING MEDIUM: Liquid
INJECTION: Direct
ASPIRATION: Turbocharged
CYLINDERS: 4
DISPLACEMENT: 199 cubic inches
BORE: 3.74 IN
STROKE: 4.53 IN
MANUFACTURER’S GROSS POWER RATING: 83 HP
RATED SPEED: 2400 RPM

DRILLING FLUID SYSTEM (ON-BOARD)
DRILLING FLUID PRESSURE, MAXIMUM: 1500 PSI
DRILLING FLUID FLOW, MAXIMUM: 30 GPM

FLUID CAPACITIES
HYDRAULIC RESERVOIR: 17 GAL
FUEL TANK: 30 GAL

BATTERY
SAE RESERVE CAPACITY RATING: 195 minutes
SAE COLD CRANK RATING @ 0° F (-18° C): 950 amps

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x