Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D10x14
  • Rig Size:
    0 - 10,000 lbs Pullback

View Manufacturers View Models

Specs

Displacement 91.4 cu-in 1.8 L
Emissions Compliance Tier II
Engine Kubota- D-1505 Diesel
Engine Cooling System 6 qt 6 L
Entry Angle 20 degrees
Fluid Tank 25 gal 94.6 L
Fuel Tank Capacity 8 gal 30 L
Fuel Type Diesel
Ground Drive Speed 1.5 mph 2.4 km/h
Height 67" 170 cm
Hydraulic Tank Capacity 18 Gal 68 L
Joint Diameter 1.66” 4 cm
Length 198" 503 cm
Length 10' 3 m
Make and Model Kubota D-15-5
Manufacturer's Gross HP Rating 47 hp 35 kw
Max Carriage Speed 125 ft/min 38.1 m/min
Max Flow 9 gpm 34.1 Lpm
Max Pressure 750 psi 51.7 bar
Max Speed 3150 rpm 3150 rpm
Max Spindle Speed 180 rpm 180 rpm
Max Spindle Torque 1400 ft-lb 1898 Nm
Min Bend Radius 95.5' 29.1 m
Min Bore Diameter 2" 5 cm
Number of Cylinders 4
Pipe Diameter 1.66" 4 cm
Pullback 9600 lbs 4354.5 kg
Rated Engine RPM 3000 rpm 3000 rpm
Rod Carrying Capacity 350' 107 m
Rod Loader Semi-automated
Thrust 9600 lbs 4354.5 kg
Torque 1400 ft-lb 1898.1 Nm
Type Forged
Weight 38 lbs 17 kg
Weight 7600 lbs 3455 kg
Width 45.5 lbs 116 cm

Additional Info

ENGINE
Make and Model: Kubota V1505-T-E
Fuel Type: Diesel
Maximum Engine RPM: 3150 rpm
Idle Speed: 1400 rpm
Rated RPM: 3000 rpm
Gross Horsepower: 44.2 hp (33 kw)
Net Horsepower: 42 hp (31.3 kw)
Torque (Maximum): 87.5 ft-lb (118.6 Nm)
Displacement: 91.4 cu-in (1.8 L)
Number of Cylinders: 4
Aspiration: Turbocharged
Max Fuel Consumption: 2.6 gph (9.7 Iph)
Air Cleaner: Donaldson RadialSeal FPG065411
EPA Certification Family: Tier 2
Maximum Operating Angle (Fore/Aft)*: 20 degrees

OPERATIONAL
Thrust: 9600 lbs (4354.5 kg)
Maximum Carriage Speed at Maximum Engine RPM: 125 ft/min (38.1 m/min)
Maximum Spindle Torque (Low at Maximum Engine RPM): 1400 ft-lb (1898.2 Nm)
Maximum Spindle Speed at Max Engine RPM: 180 rpm
Minimum Bore Diameter: 2.3 " (5.7 cm)
Maximum Ground Drive Speed at Maximum Engine RPM: 1.5 mph (2.4 km/h)
Automated Rod Loader: Yes, Semi-automated
Noise Level at Operator's Ear: 90
Drill Rack Angle: 12 deg

ELECTRICAL SYSTEM
Voltage: 12
Battery CCA Rating: 800
Alternator Current Rating: 40
Battery Group Class: MTP

HYDRAULIC SYSTEM
Auxiliary Pump Flow at Maximum Engine RPM: 8 gpm
Auxiliary Pump Relief Pressure: 1200 psi (82.7 bar)
Thrust/Pullback Pump Flow at Max Engine RPM: 21 gpm (79.5 L/min)
Thrust/Pullback Pump Relief Pressure: 3100 psi (213.7 bar)
Rotation Pump Flow at Maximum Engine RPM: 26.5 gpm (100.4 L/min)
Rotation Pump Relief Pressure: 3000 psi (206.8 bar)
Drilling Fluid System Option One
Maximum Flow: 9 gpm (34.1 L/min)
Maximum Pressure: 750 psi (51.7 bar)
On Board Tank Capacity: 25 gal (94.6 L)

FEATURES
Breakout System: Yes - Hydraulic, open-top
Stakedown System: Yes - stationary

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker, Inc. cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x