Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D1320X900
  • Rig Size:
    200,000 lbs pullback and over

View Manufacturers View Models

Specs

Emissions Compliance Tier 2 (EU Stage II)
Entry Angle 8-12 degrees
Fuel Tank Capacity 500 gal 1892.71L
Fuel Type Diesel
Height 11.5' 3.51 m
Hydraulic Tank Capacity 720 gal 2725.5L
Length 50.5' 15.39 m
Make and Model PS800 Cat C-27
Manufacturer's Gross HP Rating 800 HP 596.56 kw
Max Carriage Speed 64 ft/min 19.51 m/min
Max Speed 2000 RPM
Max Spindle Speed 36 rpm
Max Spindle Torque 102500-ft-lb 138971.55 Nm
Pullback 1360000 lbs 616885.66 kg
Rated Engine RPM 2000 RPM
Thrust 1360000 lbs 616885.66 kg
Weight 101,000 lbs 45,812.83 kg
Width 8.5' 2.59 m

Additional Info

DRILL RACK
Length (Minimum Transport): 50.5' (15.4 m)
Width: 8.5' (2.6 m)
Height (Minimum Transport): 115' (3 5 m)
Weight: 101000 lbs (45812.8 kg)
Suspension: Triple axle with air ride suspension
Front Base Anchor Length: 20' (6.1 m)
Front Base Anchor Width: 6' (1.8 m)
Front Base Anchor Height: 24" (61 cm)
Front Flat Anchor Length: 9.5' (2.9 m)
Front Flat Anchor Width: 5 ' (1 .5 m)
Front Flat Anchor Height: 8" (20.3 cm)
Rear Base Anchor Length: 16' (4.9 m)
Rear Base Anchor Width: 7.8' (2.4 m)
Rear Base Anchor Height: 8" (20.3 cm)
Number of Rear Legs: 2
Drill Rack Angle: 8 degrees to 12 degrees

DRILLERS CABIN
Length: 10'(3.1 m)
Width: 8.5'(2.6 m)
Height: 9' (2.7 m)
Weight: 6000 lbs (2721.6 kg)
Heat and Air Conditioning: In-wall combination unit

POWER PACK
Length: 22.4' (6.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 38000 lbs (17236.5 kg)
Make and Model: (1) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 500 gal (1892.7 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 800 hp (596.6 kw)
EPA Certification Family: Tier 2 (EU Stage II)

POWER PACK OPTION TWO
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-18
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1200 hp (894.8 kw)
EPA Certification Family: Tier 3 (EU Stage II)

POWER PACK OPTION THREE
Length: 32.2' (9.8 m)
Width: 8' (2.4 m)
Height: 10.3' (3.1 m)
Weight: 57260 lbs (25972.7 kg)
Make and Model: (2) CAT C-27
Fuel Type: Diesel
Fuel Capacity: 1000 gal (3785.4 L)
Hydraulic Tank Capacity: 720 gal (2725.5 L)
Maximum Engine RPM: 2000 rpm
Gross Horsepower: 1600 hp (1193.1 kw)
EPA Certification Family: Tier 2 (EU Stage II)

OPERATIONAL
Maximum Spindle Torque: 102500 ft-lb (138971.6 Nm)
Maximum Spindle Torque (Low at Maximum Engine RPM): 102500 ft-lb (138971.6 Nm)
Thrust: 1360000 lbs (616885.7 kg)
Pullback: 1360000 lbs (616885.7 kg)
Maximum Spindle Speed at Maximum Engine RPM (with PS800): 36 rpm
Maximum Spindle Speed at Maximum Engine RPM (with PS1200/PS1600): 54 rpm
Maximum Carriage Speed at Maximum Engine RPM: 64 ft/min (19.5 m/min)
Number of Rotation Motors: 1
Number of Drive Motors: 6
Mud Swivel: 3" (7.6 cm)

LOWER BREAKOUT VISE
Breakout Force: 253000 ft-lb (343022.5 Nm)
Configuration: 3-jaw clamp, 8" (20.3 cm)
Weight: 3800 lbs (1723.7 kg)
Travel: 6'(1.8 m)
Inside Diameter: 9.8 " (24.9 cm)

UPPER BREAKOUT VISE
Clamp Force: 250000 ft-lb (338955 Nm)
Configuration: 2-jaw clamp
Inside Diameter: 10" (25.4 cm)

SAFETY
Remote Lockout: Yes
Strike Alert: Yes

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker, Inc. cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x