Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    JT60
  • Rig Size:
    50,001 - 100,000 lbs pullback

View Manufacturers View Models Back to Listing

Specs

Displacement 409 in^3 6.7 L
Emissions Compliance EPA Tier 3 EU Stage IIIA
Engine Cooling System 31 qt 29 L
Entry Angle 10-16 degrees
Fuel Tank Capacity 55 gal 208 L
Fuel Type Diesel
Ground Drive Speed 2.5 mph 4 km/h
Height 101 in 2.57 m
Hydraulic Tank Capacity 36 gal 136 L
Length 331 in 8.41 m
Make and Model Cummins QSB6.7
Manufacturer's Gross HP Rating 190 hp 142 kW
Max Carriage Speed 100 fpm 30.5 m/min
Max Flow 150 gpm 560 l/min
Max Pressure 1,300 psi 90 bar
Max Spindle Speed 240 rpm 240 rpm
Max Spindle Torque 9,000 ft-lbs 12240 Nm
Min Bore Diameter 5 in 127 mm
Number of Cylinders 6
Pullback 60,000 lbs 267 kN
Rated Engine RPM 2,200 rpm 2,200 rpm
Thrust 60,000 lbs 267 kN
Weight 31,080 lb 14098 kg
Width 87 in 2.21 m

Additional Info

DIMENSIONS
-Length: 331 in (8.41 m)
-Width: 87 in (2.21 m)
-Height: 101 in (2.57 m)
-Operating Weight: 31,080 lb (14098 kg)
-Entry Angle: 10-16°
-Angle of Approach: 18°
-Angle of Departure: 13°

OPERATION U.S. METRIC
-Spindle speed, max 240 rpm
-Spindle torque, max 9,000 ft-lb (12240 Nm)
-Carriage thrust travel speed 100 fpm (30.5 m/min)
-Carriage pullback travel speed 100 fpm (30.5 m/min)
-Thrust force 60,000 lb (267 kN)
-Pullback force 60,000 lb (267 kN)
-Bore diameter 5 in (127 mm)
-Backreamer diameter Soil dependent
-Ground travel speed
-Forward/reverse 2.5 mph (4 km/h)

POWER (TIER 3)
-Engine Cummins QSB6.7
-Fuel Diesel
-Cooling medium Liquid
-Injection Direct
-Aspiration Turbocharged and charge air cooled
-Number of cylinders 6
-Displacement 409 in3 (6.7 L)
-Bore 4.21 in (107 mm)
-Stroke 4.88 in (124 mm)
-Manufacturer’s gross power rating 190 hp (142 kW)
-Rated speed 2,200 rpm
-Emissions compliance EPA Tier 3 (EU Stage IIIA)

POWER (TIER 4)
-Engine Cummins QSB6.7
-Fuel Diesel
-Cooling medium Liquid
-Injection Direct
-Aspiration Turbocharged and charge air cooled
-Number of cylinders 6
-Displacement 409 in3 (6.7 L)
-Bore 4.21 in (107 mm)
-Stroke 4.88 in (124 mm)
-Manufacturer’s gross power rating 200 hp (149 kW)
-Rated speed 2,200 rpm
-Emissions compliance EPA Tier 4 (EU Stage IV)

DRILLING FLUID SYSTEM
-Pressure, max 1,300 psi (90 bar)
-Flow, max 150 gpm (560 l/min)

FLUID CAPACITIES
-Hydraulic reservoir 36 gal (136 L)
-Fuel tank 55 gal (208 L)
-Engine lubrication oil, with filter 19 qt (18 L)
-Engine cooling system 31 qt (29 L)
-Antifreeze tank 16 gal (60 L)

POWER PIPE HD
-Length of drill pipe, nominal 180 in (4.57 m)
-Diameter of drill pipe, tool joint end 3.5 in (89 mm)
-Diameter of drill pipe 3.06 in (78 mm)
-Bend radius, min 170 ft (52 m)
-Weight of drill pipe, lined 184 lb (84 kg)
-Weight of drill pipe, large box (28 pipe) 6,096 lb (2765 kg)
-Weight of drill pipe, small box (16 pipe) 3,612 lb (1638 kg)

JT60 DRILL ROD BASKET
-Length: 186.32 inches
-Width: 20.38 inches
-Depth / Tall: 24.82 inches
-Weight: 729 lbs

BATTERY (2 USED)
-SAE reserve capacity rating 195 min
-SAE cold crank rating @ 0°F (-18°C) 950 amps

NOISE LEVEL
-Operator sound power per ISO 6394 < or = 81 dBA
-Exterior sound pressure per ISO 6393 < or = 106 dBA

VIBRATION LEVEL
-Average vibration transmitted to the operator’s hand and whole body during normal operation does not exceed 2.5 and 0.5 m/sec2 respectively.

View Manufacturers View Models Back to Listing

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x