Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    5700

View Manufacturers View Models

Specs

Engine Deutz F4M1011F, 57hp
Height 92"
Length 112" (transport)
Width 69.5"

Additional Info

DIMENSIONS
Angle of approach: 25°
Overhang beyond tire: 1.4 in
Height: 92 in
Length - transport: 112 in
Wheelbase: 53 in
Width: 69.5 in
Tread: 51 in

GENERAL
Ditch Witch model 5700 tractor, 4-wheel drive, rigid frame,
rubber tired, conventionally steered (optional rear steering) basic riding unit.

OPERATION
Vehicle speeds @ 2500 rpm with 31 x 15.50-15 tires
Forward, low range: 2.3 mph
Forward, high range: 4.3 mph
Reverse, low range: 2.2 mph
Reverse, high range: 4.0 mph
Vehicle clearance circle (SAE), no backfill blade
With front wheel steer: 30.5 ft
With rear wheel steer: 22.0 ft
Maximum allowable operating weight
2-post ROPS: 9500 lb
4-post ROPS: 9500 lb
Basic unit weight without attahment or backfill blade, with 175 lb operator: 4500 lb
* Operating weight based on H313 attachment with shortest boom, 6 in (150 mm)
wide chain, and 175 lb (79 kg) operator.

BACKFILL BLADE
Blade width: 64 in, 72 in
Blade height: 14 in
Lift height above ground*: 16in
Blade drop below ground*: 8 in
Maximum swing angle (left/right): 28°
Tilt angle (up/down): 11°
* when equipped with 64-in (1.6 m) backfill blade and 31 x 15.50-15 tires

POWER TRAIN
Ground drive transmission: hydrostatic drive infinitely variable from zero to max.,
foot pedal and hand lever operated speed /direction control.
Differentials: Dana model 60 (Carraro 26.14 optional)
Service brake: ground drive speed/direction control brakes machine hydraulically when moved to neutral position.
Parking brake: Spring, foot-operated/hand-set
Attachment drive transmission: hydrostatic, lever-operated speed infinitely variable from
zero to maximum forward with limited stroke reverse.

POWER
Engine: Deutz F4M1011F, oil cooled diesel, direct injection with individual cylinder injection pumps
Cooling medium: engine oil
Number of Cylinders: 4
Displacement 178 cubic inches
Bore: 3.58 in
Stroke: 4.41 in
Max. governed speed as installed (no load): 2500 rpm
Flywheel power @ 2500 rpm (full load): 57 hp

TIRES
Load rating at recommended pressure at 10 mph (16 kph)
29 x 12.5-15, 4-ply bar lug: 2255 lb @ 30 psi
31 x 15.50 - 15, 8-ply bar lug: 3415 lb @ 40 psi

HYDRAULIC SYSTEM
Ground drive pump capacity: 28.4 gpm
Ground drive pump relief pressure: 3625 psi
Attachment drive pump capacity: 28.4 gpm
Trencher chain pump relief pressure: 5000 psi
Plow and saw pump relief pressure: 3750 psi
Auxiliary pump capacity: 11 gpm
Auxiliary pump relief pressure: 2500 psi

FLUID CAPACITIES
Fuel tank: 16 gal
Engine oil (initial fill): 14 qt
Hydraulic reservoir: 9.5 gal
Hydraulic system (initial fill): 52 qt

BATTERY
Group 26/26R/70, cold crank @ 0° F (-18°C), 500 amp - cranking amps @ 32°F (0°C), 700 amp

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x