Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Vermeer
  • Model:
    D8x12
  • Rig Size:
    0 - 10,000 lbs Pullback

View Manufacturers View Models Back to Listing

Specs

Emissions Compliance Tier 4 Final (Stage IV) Tier 4 Final (Stage IV)
Entry Angle 18 deg
Fuel Tank Capacity 15 gal 56.7 L
Fuel Type Ultra-low sulfur diesel
Height 65" 165.1 cm
Hydraulic Tank Capacity 25 gal 94.6 L
Joint Diameter 1.88" 4.8 cm
Joint Inside Diameter 0.8" 2 cm
Length 139" 353.1 cm
Length 6" 1.8 m
Make and Model Kohler KDI1903
Manufacturer's Gross HP Rating 48 hp 35.8 kW
Max Carriage Speed 159 fpm 48.5 m/min
Max Spindle Speed 182 rpm 182 rpm
Max Spindle Torque 1200 ft-lb 1627 Nm
Min Bend Radius 57' 17.4 m
Min Bore Diameter 2.5" 6.4 cm
Pipe Diameter 1.31" 3.3 cm
Pullback 7850 lb 3563.9 kg
Rated Engine RPM 2200 rpm 2200 rpm
Thrust 7850 lb 3563.9 kg
Type Firestick drill rod (#200)
Weight 18 lb 8.2 kg
Weight 6000 lb 2721.6 kg
Weight of Pipe and Small Box 180' 54.9 m
Width 35.5" 90.2 cm

Additional Info

GENERAL WEIGHTS AND DIMENSIONS
Min transport length: 139" (353.1 cm)
Min transport width: 35.5" (90.2 cm)
Min transport height: 65" (165.1 cm)
Min weight: 6000 lb (2721.6 kg)
Max weight: 6600 lb (2993.7 kg)
Angle of approach: 18 deg
Angle of departure: 20 deg

ENGINE
Make and model: Kohler KDI1903
Fuel type: Ultra-low sulfur diesel
Max engine rpm: 2200 rpm
Gross horsepower: 48 hp (35.8 kW)
Aspiration at full engine load: Turbocharged
Max fuel consumption: 2.5 gph (9.4 lph)
Emissions rating: Tier 4 Final (Stage IV)
Max operating angle (fore/aft): 25 deg
Max operating angle (left/right): 25 deg

OPERATIONAL
Thrust rod: 7850 lb (3563.9 kg)
Pullback rod: 7850 lb (3563.9 kg)
Max carriage speed at max engine rpm - fpm (m/min): 159 fpm (48.5 m/min)
Max spindle torque (max engine rpm) - ft-lb (Nm): 1200 ft-lb (1627 Nm)
Max spindle torque - smaller rod option (max engine rpm) - ft-lb (Nm): 900 ft-lb (1220 Nm)
Max spindle speed at max engine rpm - (rpm): 182 rpm
Min bore diameter: 2.5" (6.4 cm)
Max ground drive speed at max engine rpm - mph: 2.8 mph (4.5 km/h)
Noise level at operator’s ear: 85 dB(A)
Guaranteed sound power engine: 104 dB(A)

FLUID CAPACITIES
Fuel tank: 15 gal (56.7 L)
Hydraulic system: 25 gal (94.6 L)

DRILLING FLUID SYSTEM
Max flow: 9 gpm (34.1 L/min)
Max pressure: 750 psi (50.2 bar)
Brand: FMC
Onboard tank capacity: 25 gal

FEATURES
Breakout system: Standard hydraulic vise
Drilling lights: Optional
Stakedown system: Standard
Strike Alert: Standard
Remote Lockout Control: Standard
Rod greaser: Optional
Wash wand: Optional

DRILL PIPE OPTION ONE
Thread type: Firestick drill rod (#200)
Length: 6" (1.8 m)
Rod diameter: 1.31" (3.3 cm)
Joint inside diameter: .8" (2 cm)
Joint outside diameter: 1.88" (4.8 cm)
Weight: 18 lb (8.2 kg)
Bend radius: 57' (17.4 m)
Total machine rod capacity: 180' (54.9 m)

DRILL PIPE OPTION TWO
Thread type: Firestick drill rod (#200)
Length: 6' (1.8 m)
Rod diameter: 1.66" (4.2 cm)
Joint inside diameter: .8" (2 cm)
Joint outside diameter: 1.88" (4.8 cm)
Weight: 26 lb (11.8 kg)
Bend radius: 95.5' (29.1 m)
Total machine rod capacity: 180' (54.9 m)

View Manufacturers View Models Back to Listing

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x