Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    JT2720
  • Rig Size:
    20,001 - 30,000 lbs pullback

View Manufacturers View Models

Specs

Displacement 276 cubic inches
Drill Stem 9' 10''
Engine Deere
Entry Angle 10-16 degrees
Fuel Tank Capacity 40 GAL
Fuel Type Diesel
Ground Drive Speed (FORWARD): 1.7 MPH
Height 93 IN
Hydraulic Tank Capacity 36 GAL
Joint Diameter 3.00 IN
Length (NOMINAL): 118 IN
Length 248 IN
Make and Model John Deere 4045TF275
Manufacturer's Gross HP Rating 125 HP
Max Carriage Speed 120 FPM
Max Flow 47 GPM
Max Pressure 1500 PSI
Max Speed 2400 RPM
Max Spindle Speed 225 RPM
Max Spindle Torque 3200 FT-LB
Min Bend Radius 175 FT
Min Bore Diameter 4.5 IN
Number of Cylinders 4
Pipe Diameter 2.38 IN
Pullback 27,000 lbs.
Pump Output 47 gpm
Pump Pressure 1,000 psi
Rod Carrying Capacity 520'
Thrust 27,000 lbs.
Torque 3,300 lb.ft
Weight 16,000 lbs.
Weight 90 LB
Weight of Pipe and Large Box 5000 LB
Weight of Pipe and Small Box 2500 LB
Width 81 IN

Additional Info

DIMENSIONS
OVERALL MACHINE LENGTH: 248 IN
OVERALL MACHINE WIDTH: 81 IN
OVERALL MACHINE HEIGHT: 93 IN
DRILLING UNIT OPERATING MASS: 20,900 LB
ENTRY ANGLE: 10-16 degrees
ANGLE OF APPROACH: 22 degrees
ANGLE OF DEPARTURE: 26 degrees

POWER PIPE
LENGTH OF DRILL PIPE* (NOMINAL): 118 IN
DIAMETER OF DRILL PIPE TOOL JOINT END: 3.00 IN
DIAMETER OF DRILL PIPE: 2.38 IN
MIN. BEND RADIUS: 175 FT
WEIGHT OF DRILL PIPE: 90 LB
WEIGHT OF DRILL PIPE & BOX
(JT8020 12 PIPE, JT4020 32 PIPE,
JT2720 50 PIPE): 5000 LB
WEIGHT OF DRILL PIPE & EXTRA BOX
(JT8020 12 PIPE, JT4020 16 PIPE,
JT2720 25 PIPE): 2500 LB

OPERATION
MAXIMUM SPINDLE SPEED: 225 RPM
MAXIMUM SPINDLE TORQUE: 3200 FT-LB
CARRIAGE THRUST TRAVEL SPEED: 120 FPM
CARRIAGE PULLBACK TRAVEL SPEED: 120 FPM
THRUST FORCE: 24,800 LB
PULLBACK FORCE: 27,000 LB
BORE DIAMETER: 4.5 IN
BACKREAM DIAMETER: soil dependent
GROUND TRAVEL SPEED* (FORWARD): 1.7 MPH
GROUND TRAVEL SPEED* (REVERSE): 1.7 MPH

POWER
ENGINE: John Deere 4045TF275
FUEL: Diesel
COOLING MEDIUM: Liquid
INJECTION: Direct
ASPIRATION: Turbocharged and Charge Air Cooled
NUMBER OF CYLINDERS: 4
DISPLACEMENT: 276 cubic inches
BORE: 4.19 IN
STROKE: 5.00 IN
MANUFACTURER’S GROSS POWER RATING: 125 HP
RATED SPEED: 2400 RPM

DRILLING FLUID SYSTEM (ONBOARD)
MAXIMUM DRILLING FLUID PRESSURE: 1500 PSI
MAXIMUM DRILLING FLUID FLOW: 47 GPM

FLUID CAPACITIES
HYDRAULIC RESERVOIR: 36 GAL
FUEL TANK: 40 GAL

BATTERY (2 USED)
SAE RESERVE CAPACITY RATING: 195 MIN
SAE COLD CRANK RATING: 950 AMPS
@ 0º F (-18º C)

View Manufacturers View Models

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x