Equipment Specifications Library

Basic Model Information

  • Manufacturer:
    Ditch Witch
  • Model:
    JT1220 Mach 1
  • Rig Size:
    10,001 - 20,000 lbs pullback

View Manufacturers View Models Back to Listing

Specs

Displacement 199 in3 3.3 L
Emissions Compliance EPA Tier 2/EPA Tier 4i EU Stage II/EU Stage IIIA
Entry Angle 10-14°
Fuel Tank Capacity 19 gal 72 L
Fuel Type Diesel
Ground Drive Speed 2.7 mph 4.3 km/h
Height 78" 1.98 m
Hydraulic Tank Capacity 17 gal 64 L
Joint Diameter 2.38" 60.4 mm
Length 188" 4.78 m
Length 120" 3 m
Make and Model Cummins B3.3
Manufacturer's Gross HP Rating 60 hp 45 kW
Max Carriage Speed 155 fpm 47 m/min
Max Flow 15 gpm 57 L/min
Max Pressure 1250 psi 86 bar
Max Spindle Speed 180 RPM
Max Spindle Torque 1400 ft/lbs 1898 Nm
Min Bend Radius 105' 32 m
Min Bore Diameter 3.5" 89 mm
Number of Cylinders 4
Pipe Diameter 1.82" 46.2 mm
Pullback 12,000 lbs 53.4 kN
Rated Engine RPM 2200 RPM
Thrust 10,000 lbs 44.5 kN
Weight 10100 lbs 4580 kg
Weight 54 lbs 24.5 kg
Width 51.5" 1.31 m

Additional Info

UPDATED JANUARY 2016

DIMENSIONS
Overall length*: 188 in (4.78 m)
Overall width*: 51.5 in (1.31 m)
Overall height*: 78 in (1.98 m)
Drilling unit operating mass*: 10100 lb (4580 kg)
Entry angle: 10° to 14°
Angle of approach: 18°
Angle of departure: 18

POWER PIPE
Length, nominal*: 120 in (3 m)
Diameter*: 1.82 in (46.2 mm)
Diameter, tool joint end*: 2.38 in (60.4 mm)
Bend radius, min: 120 ft (37 m)
Weight, lined*: 54 lb (24.5 kg)

OPERATION
Spindle speed, maximum*: 180 rpm
Spindle torque, maximum*: 1400 ft/lb (1898 Nm)
Carriage thrust travel speed*: 155 fpm (47 m/min)
Carriage pullback travel speed*: 155 fpm (47 m/min)
Thrust force*: 10,000 lb (44.5 kN)
Pullback force*: 12,000 lb (53.4 kN)
Bore diameter: 3.5 in (89 mm)
Backream diameter (soil dependent): Variable
Ground travel speed, maximum*
-Forward: 2.7 mph (4.3 km/h)
-Reverse: 2.7 mph (4.3 km/h)

POWER
Engine: Cummins B3.3
Fuel: Diesel
Cooling medium: Liquid
Injection: Direct
Aspiration: Natural
Cylinders: 4
Displacement: 199 in3 (3.3 L)
Bore: 3.74 in (95 mm)
Stroke: 4.53 in (115 mm)
Manufacturer's gross power rating**: 60 hp (45 kW)
Rated speed: 2200 rpm
Emissions Compliance: EPA Tier 4i (EU Stage IIIA)

DRILLING FLUID SYSTEM (ON-BOARD)
Drilling fluid pressure, maximum*: 1250 psi (86 bar)
Drilling fluid flow, maximum*: 15 gpm (57 L/min)

FLUID CAPACITIES
Hydraulic reservoir: 17 gal (64 L)
Fuel tank: 19 gal (72 L)

BATTERY
SAE Reserve capacity rating: 195 min
SAE Cold crank rating @ 0° F (-18° C): 950 A

Specifications are general and subject to change without notice.

---------------------------------------

Enclosed fluid pump system is easy to winterize and helps keep pump warm during winter operation.

Integrated electronic system with guidance control enables the tracker operator to disable power to drilling unit's thrust and rotation.

Minimal drill maintenance; with no zerks to grease each day, you'll spend more time drilling and less time servicing the unit.

Tethered ground drive controller allows the operator to maneuver the drilling unit from a position that provides increased visibility, easier loading/unloading, and easier positioning.

Rack-and-pinion thrust system provides outstanding power transfer and performance for a wide range of directional drilling jobs.

Large-capacity pipe lubrication system minimizes maintenance time by keeping contamination out.

Efficient pipe loading system allows column selection from the operator's station; Mach 1 pipeloader automation is available to further simplify operation.

Two-speed carriage significantly decreases cycle time; assisted-makeup feature increases the life of drill pipe joints by automatically matching carriage movement speed with rotation during pipe makeup and breakout.

View Manufacturers View Models Back to Listing

This information is provided for informational purposes only. HDD Broker LLC cannot warrant the accuracy or completeness of this information. This information is subject to change by the manufacturer. Some specifications may vary by model year.

HDD Broker uses cookies and collects personal information on its websites.

To learn more, review HDD Broker's Privacy Policy and Cookie Policy. By clicking "I Accept", you indicate you have adjusted your browser settings to fit your preferences and consent to HDD Broker's use of cookies.

x